Before beginning, you need to identify which gateway you are using. If you have the ATOM, please click here.
Confirm the following before beginning:
- Make sure the devices (phone) Wi-Fi is switched on.
- Make sure the Wi-Fi's router is connected to the internet.
- Refresh the phones Wi-Fi settings page so it searches for available Wi-Fi networks in range.
When first powering the Gateway for a new setup, it should start broadcasting a small Wi-Fi network called PlugHub_#### (the numbers represent the serial number of the Gateway).
If the Gateway is not broadcasting the PlugHub_#### network do the following:
- Power cycle the gateway by unplugging for approximately 45 seconds.
Perform a Wi-Fi reset on the Gateway by doing the following:
- With the Gateway plugged in, press and HOLD the programming button on the gateway for 5-9 seconds.
- Allow the gateway to complete the reset process. Once it is rebooted, it should begin broadcasting the PlugHub network.
- If the Wi-Fi reset on the Gateway did not work; next reset the firmware by doing the following:
- Unplug the Gateway
- Press and HOLD the program button on the gateway
- Without releasing the program button, plug the gateway back into outlet. Continue to hold the program button for 6 seconds after being plugged back into outlet. Then release.
- The gateway will begin resetting its firmware. This can take a few minutes.
- Once the reset is complete the gateway should begin broadcasting the Plug-Hub
For additional support:
- App: On the main account screen or login page, click on “?” Icon – this will generate an email template – be sure to fill in all information requested,
- Email: motorization.support@springswindowfashions.com,
- Customer Service Team: 1-800-221-6352
Note: Responses could take up to 24 hours
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article