RTS: How do I reprogram a remote to work with my shade(s)?

Modified on Tue, 10 Aug, 2021 at 2:55 PM

Before you begin:

a.  Identify what product listed below to locate the program button on the motor.  The various motor types are illustrated below.

b.  Have a paper clip or similar device


Locations of program buttons are based on the shade or blind (motor) type.  Certain products may need to be removed from the installation hardware to access.  


 

1. Press and hold the program button on the motor until the shade jogs once. 




 2. Select correct remote and channel.  Press and release the programming button on the control you are adding.  The shade will jog once (confirming the new controller has been added). 




Repeat for each shade to be added to new remote. 


NOTE: After initiating the first pairing step you will have 2 minutes before the motor times
out to complete the sequence.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article